        #
        | README file for
        |
        | ELSA VCAPI 0.10 for OS/2 WARP
        | Version 0.10
        |
        | Copyright (c) 1993-97 ELSA GmbH, Aachen (Germany)
        |
        |                                     Subsidiary:
        | ELSA GmbH                           ELSA Inc.
        | Sonnenweg 11                        2150 Trade Zone Blvd.
        | D-52070 Aachen                      Suite 101
        | Germany                             San Jose, CA 95131
        |                                     USA
        |
        | Phone      : +49-241-9177-0         Phone: +1-408-935-0350
        | Support Fax: +49-241-9177-113       Phone:  1-800-272-ELSA
        | BBS (modem): +49-241-9177-981       Fax  : +1-408-935-0370
        | BBS (ISDN) : +49-241-9177-7800      BBS  : +1-408-935-0380
        | CompuServe : GO ELSA                CIS  : GO ELSA
        | WWW        : http://www.elsa.de     WWW  : http://www.elsa.com
        |
        | 03/01/97

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Notes

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1.      Overview:

        This file contains notes and changes to the
        ISDN drivers.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.      Contents:

        This directory contains the following files:

        Liesmich.TXT    This file in german language
        ReadMe.TXT      This file
        VCAPI11.SYS     Virtual devicedriver for OS/2
        VCAPI11.EXE     DOS-driver for the VDM-support

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3.      Installation:

        - Install the ELSA os/2-drivers for your isdn-card. the
          driver version must be 2.00 or above.

        - Create a directory and copy all these files to this
          directory:

            md c:\elsaisdn
            copy a:\*.* c:\elsaisdn

        - Add the following line into your config.sys, directly behind
          the os2-driver for the isdn card:

            device=c:\elsaisdn\vcapi11.sys

        - Change the line DOS=LOW,NOUMB to DOS=HIGH,UMB in your CONFIG.SYS

        - Add the following line into your autoexec.bat:

            c:\elsaisdn\vcapi11.exe

        - Restart your system.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4.      Notes:

        - This driver release is BETA.
        - This driver has no WIN/OS2 support
        - You can start VCAPI11.EXE with "/Q" parameter to start
          it in quiet mode
        - You cannot de-install VCAPI11.EXE at this time
